A multi-criteria decision approach to sorting actions for promoting energy efficiency

This paper proposes a multi-criteria decision approach for sorting energy-efficiency initiatives, promoted by electric utilities, with or without public funds authorized by a regulator, or promoted by an independent energy agency, overcoming the limitations and drawbacks of cost–benefit analysis. The proposed approach is based on the ELECTRE-TRI multi-criteria method and allows the consideration of different kinds of impacts, although avoiding difficult measurements and unit conversions. The decision is based on all the significant effects of the initiative, both positive and negative, including ancillary effects often forgotten in cost–benefit analysis. The ELECTRE-TRI, as most multi-criteria methods, provides to the decision maker the ability of controlling the relevance each impact can have on the final decision in a transparent way. The decision support process encompasses a robustness analysis, which, together with a good documentation of the parameters supplied into the model, should support sound decisions. The models were tested with a set of real-world initiatives and compared with possible decisions based on cost–benefit analysis.     

On the avalanche multiplication mechanism in SPICE simulations of high-frequency bipolar transistors with thin basewidths and low breakdown voltages

A very simple subcircuit model for SPICE simulation of bipolar transistors affected by the avalanche multiplication mechanism is presented. The currently available models for bipolar transistors in circuit simulators do not consider this effect, which can lead to serious simulation errors when high-frequency thin basewidths transistors with low and soft breakdown voltages are simulated. The simulated results predicted by SPICE with the proposed subcircuit are compared with the measured data obtained from several transistors with low and soft breakdown voltages and a good agreement is reported.     

Simple High Performance General Purpose Single Channel Analyser

A simple single channel analyser using standard components is described. High temperature stability (0.002% / °C) and resolution (? 100 ?V) is achieved. The two-level generator circuits described allow full DC coupling of the input pulses. The performance of these circuits is discussed in detail and experimental results presented.     

Activated sludge process monitoring through in situ near-infrared spectral analysis

The application of near infrared (NIR) spectroscopy for industrial process monitoring is achieving increasing importance over the last twenty years. In fact, the real time monitoring capacity of NIR spectroscopy is a very important feature for process monitoring, prediction and control as it allows a fast evaluation of the state of the process. However, the application of NIR spectroscopy in wastewater treatment processes is still to be explored. Although some applications of the technique for wastewater monitoring have been reported in the literature, there is still a need for more investigation related with applications, limitations and advantages of the technique when compared with other methods.An activated sludge reactor for aerobic treatment of a complex medium was monitored in situ with a NIR transflectance probe and traditional chemical parameters analysed off-line. NIR spectrophotometric data measured at the feed, reactor and settler were coupled to principal component analysis (PCA) to infer about the ability of this monitoring system to detect changes in the feed influent. The analysis of the score plots resulting from PCA permitted to identify the moments at which the perturbations occurred and to follow the consequent instability induced in the reactor till the day where the system is recuperated. The promising results obtained, suggest the interest in more detailed studies on the feasibility of NIR spectroscopy as an alternative method for monitoring and control of wastewater treatment processes.     

Probabilistic analysis of ultimate seismic bearing capacity of strip foundations

This paper presents a reliability analysis of the pseudo-static seismic bearing capacity of a strip foundation using the limit equilibrium theory. The first-order reliability method (FORM) is employed to calculate the reliability index. The response surface methodology (RSM) is used to assess the Hasofer–Lind reliability index and then it is optimized using a genetic algorithm (GA). The random variables used are the soil shear strength parameters and the seismic coefficients (k_h and k_v). Two assumptions (normal and non-normal distribution) are used for the random variables. The assumption of uncorrelated variables was found to be conservative in comparison to that of negatively correlated soil shear strength parameters. The assumption of non-normal distribution for the random variables can induce a negative effect on the reliability index of the practical range of the seismic bearing capacity.     

Chain extension reaction in solid‐state polymerization of recycled PET: The influence of 2,2′‐bis‐2‐oxazoline and pyromellitic anhydride

Conventional and chain extended‐modified solid‐state polymerization (SSP) of postconsumer poly(ethylene terephthalate) (PET) from beverage bottles was investigated. SSP was carried out at several temperatures, reaction times, and 2,2′‐bis‐2‐oxazoline (OXZ) or pyromellitic anhydride (ANP) concentrations. The OXZ was added by impregnation with chloroform or acetone solution. Higher molecular weights were reached when the reaction was carried out with OXZ, resulting in bimodal distribution. The molecular weights of the flakes reacted at 230°C for 4 h were 85,000, 95,000, and 100,000 for samples impregnated with 0, 0.5, and 1.25 wt % OXZ solution, respectively. In the case of reactions with ANP, branched chains were obtained. The thermal and thermal‐mechanical‐dynamic properties of these high‐molecular‐weight recycled PET were determined. For OXZ‐reacted samples, the reduction of crystallinity was observed as the reaction time was increased, becoming evident the destruction of the crystalline phase. The chain extended samples did not show changes in thermal relaxations or thermal degradation behavior. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Advantages and limitations of in vitro and in vivo methods of iron and zinc bioavailability evaluation in the assessment of biofortification program effectiveness

ABSTRACT

Biofortification aims to improve the micronutrient concentration of staple food crops through the best practices of breeding and modern biotechnology. However, increased zinc and iron concentrations in food crops may not always translate into proportional increases in absorbed zinc (Zn) and iron (Fe). Therefore, assessing iron and zinc bioavailability in biofortified crops is imperative to evaluate the efficacy of breeding programs. This review aimed to investigate the advantages and limitations of in vitro and in vivo methods of iron and zinc bioavailability evaluation in the assessment of biofortification program effectiveness. In vitro, animal and isotopic human studies have shown high iron and zinc bioavailability in biofortified staple food crops. Human studies provide direct knowledge regarding the effectiveness of biofortification, however, human studies are time consuming and are more expensive than in vitro and animal studies. Moreover, in vitro studies may be a useful preliminary screening method to identify promising plant cultivars, however, these studies cannot provide data that are directly applicable to humans. None of these methods provides complete information regarding mineral bioavailability, thus, a combination of these methods should be the most appropriate strategy to investigate the effectiveness of zinc and iron biofortification programs.     

Near-zero triangular location through time-slotted mobility prediction

To setup efficient wireless mesh networks, it is fundamental to limit the overhead needed to localize a mobile user. A promising approach is to rely on a rendezvous-based location system where the current location of a mobile node is stored at specific nodes called locators. Nevertheless, such a solution has a drawback, which happens when the locator is far from the source–destination shortest path. This results in a triangular location problem and consequently in increased overhead of signaling messages. One solution to prevent this problem would be to place the locator as close as possible to the mobile node. This requires however to predict the mobile node’s location at all times. To obtain such information, we define a mobility prediction model (an agenda) that, for each node, specifies the mesh router that is likely to be the closest to the mobile node at specific time periods. The location service that we propose formalizes the integration of the agenda with the management of location servers in a coherent and self-organized fashion. To evaluate the performance of our system compared to traditional approaches, we use two real-life mobility datasets of Wi-Fi devices in the Dartmouth campus and Taxicabs in the bay area of San Francisco. We show that our strategy significantly outperforms traditional solutions; we obtain gains ranging from 39 to 72% compared to the centralized scheme and more than 35% compared to a traditional rendezvous-based solution.     

Juice from king palm (Archontophoenix alexandrae) leaf sheathes: chemical characterisation and use in soft drink formulation

The heart of palm is a food extracted from several species of palm trees. Only 10–20% of the raw material is transformed into canned hearts of palm, therefore this agro‐industry generates a large quantity of solid residue. The aim of this work was to extract and characterise a juice produced from this solid residue. This extract is compared with the traditional fruit juices (orange and pineapple juices), obtaining higher contents of minerals, such as magnesium (22.80 mg/100 g) and potassium (276.90 mg/100 g), phenolic compounds (gallic, 3,4‐dihydroxybenzoic, chlorogenic, syringic and caffeic acids) and high free radical scavenging capacity (expressed as 2,2‐diphenyl‐1‐picrylhydrazyl), which suggest high antioxidant activity. Additionally, a new soft drink was formulated using this king palm juice as its main ingredient. The soft drink samples formulated with this juice had high sensory acceptability and high intention of consumption, which suggests an important and low‐cost application for this industrial residue.